MZ traveller carburettor question - i took the carb off my MZ a few months ago and i am now rebuilding the bike, but i cant remember where the hose from the left hand inlet manifold connects to, see pic below? Can anyone help?
Gareth
MZ/MuZ Riders
A community for owners and riders or MZ Motorcycles, Scooters, and ATVs.
MZ Traveller carburettor question
Moderators: DAVID THOMPSON, phlat65
7 posts
• Page 1 of 1
MZ Traveller carburettor question
by silverfox » Sat Jul 18, 2020 12:00 pm
- Attachments
-
- Inlet manifold.PNG (16.02 KiB) Viewed 2016 times
- silverfox
- Posts: 6
- Joined: Sun Jun 07, 2020 9:52 am
Re: MZ Traveller carburettor question
by philinnc » Thu Jul 23, 2020 12:16 pm
What on this bike is operated via vacuum? Fuel valve? Something in the emissions, like connected to the air box to scavenge?
- philinnc
- Posts: 6
- Joined: Wed Jun 10, 2020 6:51 am
Re: MZ Traveller carburettor question
by breakwellmz » Thu Jul 23, 2020 1:55 pm
On my Mastiff it`s blanked off but doesn`t it operate the fuel tap on a Skorpion?
- breakwellmz
- Posts: 805
- Joined: Sun Dec 16, 2007 7:11 am
- Location: SW England
Re: MZ Traveller carburettor question
by DAVID THOMPSON » Mon Jul 27, 2020 12:04 pm
my traveller has a hand valve/petcock it is a 97
Dave 2002 MZ RT125+1995 Saxon Tour(500cc)
1997 MZ 660 Traveller+6/13/09 WV USA
"IN the end times the IDIOTS will be in charge
of everything"
"I like the road less traveled if it's PAVED!"
wd8cyv at yahoo dot com
1997 MZ 660 Traveller+6/13/09 WV USA
"IN the end times the IDIOTS will be in charge
of everything"
"I like the road less traveled if it's PAVED!"
wd8cyv at yahoo dot com
-
DAVID THOMPSON - Moderator
- Posts: 5153
- Joined: Sun Nov 23, 2003 11:01 am
- Location: Parkersburg, West Virginia USA .questions answered MZ 95 up, BMW 1953 to 1979 and ham radio WD8CYV
Re: MZ Traveller carburettor question
by Puffs » Tue Jul 28, 2020 3:21 am
Following a biased and flawed moderator choice (someone posting aggressive personal attacks is rewarded, while my technical posts are removed - behind my back & without any justification!), I have withdrawn from this forum.
Last edited by Puffs on Mon Apr 03, 2023 11:48 am, edited 1 time in total.
-
Puffs - Posts: 2007
- Joined: Tue Jan 16, 2018 11:20 am
- Location: Ardennes, Belgium.
Re: MZ Traveller carburettor question
by Puffs » Tue Jul 28, 2020 3:43 am
Following a biased and flawed moderator choice (someone posting aggressive personal attacks is rewarded, while my technical posts are removed - behind my back & without any justification!), I have withdrawn from this forum.
Last edited by Puffs on Mon Apr 03, 2023 11:49 am, edited 1 time in total.
-
Puffs - Posts: 2007
- Joined: Tue Jan 16, 2018 11:20 am
- Location: Ardennes, Belgium.
Re: MZ Traveller carburettor question
by breakwellmz » Tue Jul 28, 2020 7:32 am
I would just blank it off it may be a vacuum connection for a fuel tap used on a Yamaha model, XTZ660 or SZR660.
- breakwellmz
- Posts: 805
- Joined: Sun Dec 16, 2007 7:11 am
- Location: SW England
7 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 40 guests