MZ/MuZ Riders
A community for owners and riders or MZ Motorcycles, Scooters, and ATVs.
stripped out allen head bolt in oil filter cover
Moderators: DAVID THOMPSON, phlat65
3 posts
• Page 1 of 1
stripped out allen head bolt in oil filter cover
by Little General » Thu Dec 17, 2020 5:08 pm
The top right bolt in the oil filter cover is stripped out on the bike I just bought. Its behind the exhaust pipes and the don't look like would come off very easy. The only way I see is to drill it out and try some vise grips to remove it . Any ideas?
- Little General
- Posts: 34
- Joined: Thu Dec 10, 2020 11:03 am
Re: stripped out allen head bolt in oil filter cover
by Little General » Thu Dec 17, 2020 5:49 pm
Well, you tube to the rescue. I took a star bit and hammered it into the allan head and it came out.
- Little General
- Posts: 34
- Joined: Thu Dec 10, 2020 11:03 am
Re: stripped out allen head bolt in oil filter cover
by DAVID THOMPSON » Thu Dec 17, 2020 6:38 pm
some times hard taping helps
then vice grips on the head and twist..
helps with this kind of problem
then vice grips on the head and twist..
helps with this kind of problem
Dave 2002 MZ RT125+1995 Saxon Tour(500cc)
1997 MZ 660 Traveller+6/13/09 WV USA
"IN the end times the IDIOTS will be in charge
of everything"
"I like the road less traveled if it's PAVED!"
wd8cyv at yahoo dot com
1997 MZ 660 Traveller+6/13/09 WV USA
"IN the end times the IDIOTS will be in charge
of everything"
"I like the road less traveled if it's PAVED!"
wd8cyv at yahoo dot com
-
DAVID THOMPSON - Moderator
- Posts: 5153
- Joined: Sun Nov 23, 2003 11:01 am
- Location: Parkersburg, West Virginia USA .questions answered MZ 95 up, BMW 1953 to 1979 and ham radio WD8CYV
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 138 guests