Hi all, I have just acquired a 1971 ES250/2 and not knowing the history wanted to drop the oil and give it a fresh refill.
Can someone give me a heads up on the drain plugs as there seem to be a couple under the engine. I guess the level is measured by the small screw in the left casing however I am a little confused as to why there are more than one drain bolts.
Any help would be appreciated
Stan
MZ/MuZ Riders
A community for owners and riders or MZ Motorcycles, Scooters, and ATVs.
ES250/2 Oil Change
Moderators: DAVID THOMPSON, phlat65
3 posts
• Page 1 of 1
ES250/2 Oil Change
by Harley_Stan » Tue Aug 19, 2014 6:10 am
- Harley_Stan
- Posts: 2
- Joined: Tue Aug 19, 2014 6:00 am
Re: ES250/2 Oil Change
by paulatradese-6 » Tue Aug 19, 2014 2:34 pm
Stan,
Looking at the bike from the right hand side of the bike the first bolt is the oil drain plug, the furthest is the gear change detent bolt. As far as I can remember from the ES I had. That is the layout on the TS anyway. Hope this helps.
Looking at the bike from the right hand side of the bike the first bolt is the oil drain plug, the furthest is the gear change detent bolt. As far as I can remember from the ES I had. That is the layout on the TS anyway. Hope this helps.
Last edited by paulatradese-6 on Tue Aug 19, 2014 2:41 pm, edited 1 time in total.
- paulatradese-6
- Posts: 11
- Joined: Sun Aug 03, 2014 8:42 am
- Location: Sheffield
Re: ES250/2 Oil Change
by paulatradese-6 » Tue Aug 19, 2014 2:40 pm
see for more: viewtopic.php?f=5&t=7328
- paulatradese-6
- Posts: 11
- Joined: Sun Aug 03, 2014 8:42 am
- Location: Sheffield
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 13 guests