99 Skorpion Sport

Black Panther/Street Moto, Baghira, Enduro, Mastiff, Skorpion Traveller and Tour.

Moderators: DAVID THOMPSON, phlat65

99 Skorpion Sport

Postby AustralianMuZ » Sat Nov 02, 2013 4:32 am

Hi everyone I'm new to MuZ's and I just purchased a 99 660 Sport.
It has a couple of small issues that I'm wandering about. First up the rear brake is dragging a bit and I was wandering if the Grimeca's are known for this and is there a kit for servicing them?
2nd thing is the rear brake doesn't switch the brake on, once again is this common and is it a case of replacing the switch itself?
Attachments
1454864_616842151687964_1480776129_n.jpg
My little Scorpio and the skorpion
1000002_616842235021289_1047177486_n.jpg
Someone has used liquid nails to stick metal washers for a tank bag on it
AustralianMuZ
 
Posts: 20
Joined: Sat Nov 02, 2013 4:06 am

Re: 99 Skorpion Sport

Postby DAVID THOMPSON » Sat Nov 02, 2013 6:25 am

the rt125 uses same hydraulic switch and i have had several fail
seals in calipers same as some honda goldwing
and after 2009 or so kawasaki klr 650 caliper units look the same and use the same pads
dave

couple kymco scooters have calipers that look the same
i think it was called a bet and win here ???
Dave 2002 MZ RT125+1995 Saxon Tour(500cc)
1997 MZ 660 Traveller+6/13/09 WV USA
"IN the end times the IDIOTS will be in charge
of everything"
"I like the road less traveled if it's PAVED!"
wd8cyv at yahoo dot com
User avatar
DAVID THOMPSON
Moderator
 
Posts: 5161
Joined: Sun Nov 23, 2003 11:01 am
Location: Parkersburg, West Virginia USA .questions answered MZ 95 up, BMW 1953 to 1979 and ham radio WD8CYV

Re: 99 Skorpion Sport

Postby MZ in Oz » Sat Nov 02, 2013 2:21 pm

Hi mate, Where are you based ?
I'm in Brisbane and have 2 Skorps on the road, as to the rear brake problem, yes the switches do play up, both mine don't work but can be replaced with over counter from any auto parts shop. Take your old one in for comparison.
Brake drag is seized pistons, disassemble the caliper clean all the pistons and seals with metho and reassemble with a light smear of silicon grease or silicon oil.
I do mine this every time I replace pads. Catch you out on the road someday.
Russell.
MZ in Oz
 
Posts: 32
Joined: Tue May 14, 2013 12:35 am

Re: 99 Skorpion Sport

Postby AustralianMuZ » Sat Nov 02, 2013 3:53 pm

Cheers for the replies, I'm from south oz mate :).
That's good to hear some current model stuff shares parts with these things. I'm also chasing an English workshop manual, does it exist? Lol
AustralianMuZ
 
Posts: 20
Joined: Sat Nov 02, 2013 4:06 am

Re: 99 Skorpion Sport

Postby DAVID THOMPSON » Sat Nov 02, 2013 6:37 pm

660 szr engine manual is close
bottom end is also like 1995 xt600 usa
Dave 2002 MZ RT125+1995 Saxon Tour(500cc)
1997 MZ 660 Traveller+6/13/09 WV USA
"IN the end times the IDIOTS will be in charge
of everything"
"I like the road less traveled if it's PAVED!"
wd8cyv at yahoo dot com
User avatar
DAVID THOMPSON
Moderator
 
Posts: 5161
Joined: Sun Nov 23, 2003 11:01 am
Location: Parkersburg, West Virginia USA .questions answered MZ 95 up, BMW 1953 to 1979 and ham radio WD8CYV

Re: 99 Skorpion Sport

Postby AustralianMuZ » Sun Nov 03, 2013 5:36 am

Cheers for that. I've also noticed that the front brake lever is bent, is there any other model bike that is interchangeable with these 660's?
AustralianMuZ
 
Posts: 20
Joined: Sat Nov 02, 2013 4:06 am

Re: 99 Skorpion Sport

Postby DAVID THOMPSON » Sun Nov 03, 2013 8:30 am

the levers are common only to mz as far as i can tell
best to replace with something you can source in OZ

the brake unit on the klr650 made after 2009 may work

and boy have i spent a bunch on levers

dave
Dave 2002 MZ RT125+1995 Saxon Tour(500cc)
1997 MZ 660 Traveller+6/13/09 WV USA
"IN the end times the IDIOTS will be in charge
of everything"
"I like the road less traveled if it's PAVED!"
wd8cyv at yahoo dot com
User avatar
DAVID THOMPSON
Moderator
 
Posts: 5161
Joined: Sun Nov 23, 2003 11:01 am
Location: Parkersburg, West Virginia USA .questions answered MZ 95 up, BMW 1953 to 1979 and ham radio WD8CYV

Re: 99 Skorpion Sport

Postby MZ in Oz » Sun Nov 03, 2013 8:56 pm

I get my brake levers from this supplier from their Ebay site.
http://mzmotorcyclespares.yolasite.com/
Cutch levers are easy to find, brake levers are non existent in Oz, closest fit I found was off a KLR 250 early model. Alternative is replace master cylinder with something from Jap bike.
MZ in Oz
 
Posts: 32
Joined: Tue May 14, 2013 12:35 am

Re: 99 Skorpion Sport

Postby DAVID THOMPSON » Sun Nov 03, 2013 10:17 pm

that link is to kevin salt he is a breaker of all brands of bikes
located in london uk
dave
Dave 2002 MZ RT125+1995 Saxon Tour(500cc)
1997 MZ 660 Traveller+6/13/09 WV USA
"IN the end times the IDIOTS will be in charge
of everything"
"I like the road less traveled if it's PAVED!"
wd8cyv at yahoo dot com
User avatar
DAVID THOMPSON
Moderator
 
Posts: 5161
Joined: Sun Nov 23, 2003 11:01 am
Location: Parkersburg, West Virginia USA .questions answered MZ 95 up, BMW 1953 to 1979 and ham radio WD8CYV

Re: 99 Skorpion Sport

Postby Old Dog » Mon Nov 04, 2013 4:30 am

If you do a search I am sure Bill J mentioned a replacement indeed he gave me one off a TZR or something Yam, all the parts tend to Yam or Italian. Very few are MZ specific like the tank. BTW what happened to my mate Bill Campbell in Sydney. I have tried to email but nothing...Bill come back all is forgiven!! Top bloke!
All the best

Old Dog

He hath no grave, is covered with the sky and the way to heaven out of all places is like in length and distance
Old Dog
 
Posts: 322
Joined: Mon Mar 07, 2005 4:09 pm
Location: UK

Re: 99 Skorpion Sport

Postby AustralianMuZ » Sun Nov 10, 2013 9:48 pm

Cheers for the info guys, I've purchased a new muz brake lever and rear brake switch from the UK last week so that's a start.
Now I'm on the hunt for a bottom half fairing to make it a complete fairing. Is it a case of waiting to find a real 'replica' being stripped or does someone make a copy?
AustralianMuZ
 
Posts: 20
Joined: Sat Nov 02, 2013 4:06 am

Re: 99 Skorpion Sport

Postby AustralianMuZ » Sun Jan 05, 2014 8:05 pm

Well I've scrapped the idea of servicing and they're being swapped out for a cagiva mito brembo up front and Ducati monster rear brembo :).
Other than purpose made race glass what front fairings have people fitted to their skorpions? I'm looking at an rgv fairing this week but I'm sure it will be far too small!
AustralianMuZ
 
Posts: 20
Joined: Sat Nov 02, 2013 4:06 am

Re: 99 Skorpion Sport

Postby hb7 » Sun Jan 05, 2014 9:54 pm

Honda TRX450 and some other Hondas brake lever fits the Skorpion, comes in various short and articulated styles.
Honda copied Domino....
hb7
 
Posts: 348
Joined: Wed Jun 16, 2004 10:27 pm
Location: Los Angeles

Re: 99 Skorpion Sport

Postby AustralianMuZ » Sun Jan 05, 2014 10:31 pm

Spewing I didn't know about them a couple of months ago haha, the skorpion levers are horrible
AustralianMuZ
 
Posts: 20
Joined: Sat Nov 02, 2013 4:06 am

Re: 99 Skorpion Sport

Postby hb7 » Sun Jan 05, 2014 10:45 pm

The stock levers do the job, the Gremica calipers usually just need some tlc and silicone grease.
If you want to trade for levers, let me know...
The Bottom fairing can be sourced from http://www.beasleycomposites.com/
hb7
 
Posts: 348
Joined: Wed Jun 16, 2004 10:27 pm
Location: Los Angeles

Next

Return to 660 cc

Who is online

Users browsing this forum: No registered users and 3 guests

cron