MZ/MuZ Riders

Hi,

anyone replaced the two chain rollers towards the front of the sing arm the rubbers on mine are pretty worn, and would like to put some new ones on there are there any equivalents as fitted to other bikes or anyone know the diameter.?

the most abused device in history skate board wheels ..
they make good frame sliders also
just put a very good bearing in them

Many enduro/MX bikes have rollers like that.
Normally 2 sealed bearings in there. And they both die quickly, it is not a comfy life they have.

DAVID THOMPSON wrote:the most abused device in history skate board wheels ..
they make good frame sliders also
just put a very good bearing in them

done the skate board wheels for my axle sliders,

for reference they are 32mm diameter, 28mm width. i took mine off today, and mounted them in my lathe and turned them smooth job done saved myself a few quid they be ok for the moment.

mounted them in my lathe

if i ever move i will build a box trailer and put the lathe in it and take it with me
you can use it to wind up a transformer to make a buzz box welder
and things are good
dave