Page 1 of 2
MZ Baghira / KTM 640 Adventure Bodywork
Posted:
Mon Jun 22, 2020 11:16 amby breakwellmz
Re: MZ Baghira / KTM 640 Adventure Bodywork
Posted:
Mon Jun 22, 2020 5:16 pmby handsomejackuk
i wonder what gear lever is on that...?
has anyone managed to get a better lever to fit, as mine is a bit home made...
suggestions please..
Re: MZ Baghira / KTM 640 Adventure Bodywork
Posted:
Tue Jun 23, 2020 3:48 amby breakwellmz
That`s the setup i have on mine (No linkage) Will try and find out what i used and where it came from.
Re: MZ Baghira / KTM 640 Adventure Bodywork
Posted:
Tue Jun 23, 2020 8:35 amby breakwellmz
Re: MZ Baghira / KTM 640 Adventure Bodywork
Posted:
Tue Jun 23, 2020 12:59 pmby DAVID THOMPSON
this makes the shift order reversed so warn others if you let them ride it
???
Re: MZ Baghira / KTM 640 Adventure Bodywork
Posted:
Wed Jun 24, 2020 1:30 amby breakwellmz
It doesn`t change the shift pattern David.
Cheers.
Re: MZ Baghira / KTM 640 Adventure Bodywork
Posted:
Wed Jun 24, 2020 4:18 amby DAVID THOMPSON
mine is a traveller and i thought it would make first as one up if that linkage that is a fuss to make work
was done away with
Re: MZ Baghira / KTM 640 Adventure Bodywork
Posted:
Wed Jun 24, 2020 4:29 amby Puffs
Following a biased and flawed moderator choice (someone posting aggressive personal attacks is rewarded, while my technical posts are removed - behind my back & without any justification!), I have withdrawn from this forum.
Re: MZ Baghira / KTM 640 Adventure Bodywork
Posted:
Wed Jun 24, 2020 7:17 amby breakwellmz
Linkage on Skorpion is different to Baghira/Mastiff one.
viewtopic.php?f=3&t=7530&start=15
Re: MZ Baghira / KTM 640 Adventure Bodywork
Posted:
Wed Jun 24, 2020 4:31 pmby handsomejackuk
thanks i know what to get now mine looks really ugly i try and get something like that now.... yz250...
Re: MZ Baghira / KTM 640 Adventure Bodywork
Posted:
Thu Jun 25, 2020 2:44 amby breakwellmz
I will check today the measurements of the one i actually fitted and get back to you, i seem to think i had more than one attempt at getting it right(or that could have been another bike altogether!)
Re: MZ Baghira / KTM 640 Adventure Bodywork
Posted:
Fri Jun 26, 2020 7:40 amby breakwellmz
Hi, sorry for delay.
Its looks like it`s the upper one i fitted in the link i forwarded.
It puts the centre-line of the toe end of the lever 200mm to the centre-line of the footrest (My Beta has 190mm) fine for my size tens!
Cheers
Re: MZ Baghira / KTM 640 Adventure Bodywork
Posted:
Fri Jun 26, 2020 4:25 pmby handsomejackuk
thats sounds good i measured mine last night, i cant remember what the offset was but the one you suggested sounds like its what i need...
thanks....Al...
Re: MZ Baghira / KTM 640 Adventure Bodywork
Posted:
Sat Jul 25, 2020 4:24 amby breakwellmz
I got in touch with the seller of the MZ/KTM some while ago to ask him about his carb mods, this was his reply -
"The new carb is for the Yamaha Raptor/Grizzly 660. It fits the existing inlet/outlet rubbers. The mixture was set using a lambda sensor to get the jetting/needle position right. The original carb + cables come with the bike, so it could easily be returned to standard. I found the old carb hard to setup, or rather, once set it would 'drift' over time and need resetting. The new carb might not give as much top-end, but that wasn't a problem for me"
Re: MZ Baghira / KTM 640 Adventure Bodywork
Posted:
Wed Nov 02, 2022 2:30 pmby 7inarow+
Hi all I’ve just come across this thread.
I brought this bike in July 22, it’s been a pain but fun, up and running even though I’ve got a list of stuff still to do.