Page 1 of 1

dire need of skorpion front brake line .

PostPosted: Wed Jul 15, 2020 2:27 pm
by buell1965
trying to find a replacement or the equivalent for a 1996 MZ 660 skorpion , got a bad leak at barber motorsports park during wera on 7-4-20 but still ran 1:58 , any help would be appreciated very much and thank you in advance . Front brake line . Cheers

Re: dire need of skorpion front brake line .

PostPosted: Wed Jul 15, 2020 2:53 pm
by droy
nothing special about it - just look for braided brake lines on Ebay with similar length and fittings.

BTW - do you own a Buell - if so which model?

Re: dire need of skorpion front brake line .

PostPosted: Thu Jul 16, 2020 2:46 am
by buell1965
copy that . i think i will look for a similar piece that will fit a gremica caliper . 1996 buell S1 bought new in 96 :D

Re: dire need of skorpion front brake line .

PostPosted: Thu Jul 16, 2020 4:13 am
by buell1965
i used this forum to come up with a plan for M10x1 banjo bolts and correct size lines . thnx for the input .

Re: dire need of skorpion front brake line .

PostPosted: Thu Jul 16, 2020 6:16 am
by droy
So Mr S1 owner

So can you take a look at the gas cap ring on the Buell and see if you think its the and bolt pattern and diameter is the same? I

Hoping to find an alternative non locking gas cap ring and assembly for my Skorpions.

Thanks

Re: dire need of skorpion front brake line .

PostPosted: Wed Jul 22, 2020 5:50 am
by buell1965
Here is the parts list for front brake line that I had made

Re: dire need of skorpion front brake line .

PostPosted: Wed Jul 22, 2020 5:52 am
by buell1965
D Roy, I will upload some photos of the buell fuel cap