Page 17 of 18
Re: Project Cafe Rocket 686 begins. Finally!
Posted:
Sun Feb 28, 2016 6:26 pmby dandywarhol
edfmaniac wrote:Thanks. I appreciate it. Since I realized that the caliper bolts to the outside of the bracket, unlike the original equipment, I've determined that the Ducati bracket could be made to work. My problem now is the diameter of the rotor. Evidently the SZR disc is smaller than both the Ducati and the MZ discs. Looks like I'm either going to have to wait on an SZR bracket to show up on Ebay or I'm going to have to come up with a custom built or universal type bracket. I've even offered finder's fees to a few bike breakers in Europe and still haven't heard anything.
Give these guys a try
http://stores.ebay.co.uk/BA-Bikes?_trks ... 7675.l2563 , I got stuff from them and found them very helpful and they have several SZR/MZs in bits
Re: Project Cafe Rocket 686 begins. Finally!
Posted:
Sun Feb 28, 2016 6:55 pmby droy
Check you PM. I might have an option for you.
Re: Project Cafe Rocket 686 begins. Finally!
Posted:
Mon Feb 29, 2016 1:44 amby edfmaniac
It's the Belgarda model only that is the same as the SZR but thanks.
Re: Project Cafe Rocket 686 begins. Finally!
Posted:
Mon Feb 29, 2016 1:45 amby edfmaniac
dandywarhol wrote:edfmaniac wrote:Thanks. I appreciate it. Since I realized that the caliper bolts to the outside of the bracket, unlike the original equipment, I've determined that the Ducati bracket could be made to work. My problem now is the diameter of the rotor. Evidently the SZR disc is smaller than both the Ducati and the MZ discs. Looks like I'm either going to have to wait on an SZR bracket to show up on Ebay or I'm going to have to come up with a custom built or universal type bracket. I've even offered finder's fees to a few bike breakers in Europe and still haven't heard anything.
Give these guys a try
http://stores.ebay.co.uk/BA-Bikes?_trks ... 7675.l2563 , I got stuff from them and found them very helpful and they have several SZR/MZs in bits
That's who I purchased my Brembo wheels from. They already sold the bracket.
Re: Project Cafe Rocket 686 begins. Finally!
Posted:
Tue Mar 01, 2016 11:28 amby twinlinemoto
Correct me if Im wrong, but I believe this bracket is the same as the Ducati 620/750/900 monster and 750/900 supersport. These models all use the same brembo wheels and calipers... might be worth a check?
Re: Project Cafe Rocket 686 begins. Finally!
Posted:
Tue Mar 01, 2016 1:30 pmby edfmaniac
Close but not the same. The diameter of the brake rotors are different, the axles are different, the offset between the planes of the brake caliper and wheel spacer surfaces are different, and the thickness at the axle is different. I can work with all of those except the rotor diameter. If I can't find the correct bracket, I'll probably have one made that will be all one piece, instead of a mass of bushings and shims etc.
Re: Project Cafe Rocket 686 begins. Finally!
Posted:
Tue Mar 01, 2016 2:20 pmby twinlinemoto
Damn, I thought that would have been great. Is the SZR the only one with that rotor diameter? If you didn't already have SZR wheels, would the ducati wheels work?
Re: Project Cafe Rocket 686 begins. Finally!
Posted:
Tue Mar 01, 2016 5:24 pmby dandywarhol
edfmaniac wrote:Close but not the same. The diameter of the brake rotors are different, the axles are different, the offset between the planes of the brake caliper and wheel spacer surfaces are different, and the thickness at the axle is different. I can work with all of those except the rotor diameter. If I can't find the correct bracket, I'll probably have one made that will be all one piece, instead of a mass of bushings and shims etc.
http://www.ebay.co.uk/itm/Yamaha-SZR-66 ... SwJcZWc5Wp
Re: Project Cafe Rocket 686 begins. Finally!
Posted:
Tue Mar 01, 2016 6:54 pmby edfmaniac
That's it!!!! That's the part I need. The seller says they won't ship to the USA but I have sent them a message begging them to reconsider. If they decline, would you be willing to help a fellow MZ fan out and be the middle man, assuming they will ship to your country. I would reimburse in some way of course. This is a very hard to find item.
Re: Project Cafe Rocket 686 begins. Finally!
Posted:
Wed Mar 02, 2016 2:48 amby dandywarhol
Yes
Re: Project Cafe Rocket 686 begins. Finally!
Posted:
Wed Mar 02, 2016 8:19 amby edfmaniac
Well no word from the seller on shipping to the US so I'm officially begging for someone in Europe to help me get this thing shipped to Texas. I have a 100% rating on Ebay, and no complaints from people who I've sold to on this site, so I'm trustworthy. Any help would be appreciated. I prefer Paypal. Thanks.
Re: Project Cafe Rocket 686 begins. Finally!
Posted:
Wed Mar 02, 2016 8:23 amby edfmaniac
dandywarhol wrote:edfmaniac wrote:Close but not the same. The diameter of the brake rotors are different, the axles are different, the offset between the planes of the brake caliper and wheel spacer surfaces are different, and the thickness at the axle is different. I can work with all of those except the rotor diameter. If I can't find the correct bracket, I'll probably have one made that will be all one piece, instead of a mass of bushings and shims etc.
http://www.ebay.co.uk/itm/Yamaha-SZR-66 ... SwJcZWc5Wp
I'm curious how you found this listing. I've been doing searches for this thing for a while, and even copy/pasted the heading for the item into the search window on the very page it's listed on, and the search engine will not pull it up. Only the direct link, or looking through the sellers inventory reveals that the part is actually available. Frustrated.
Re: Project Cafe Rocket 686 begins. Finally!
Posted:
Wed Mar 02, 2016 10:37 amby edfmaniac
Found someone on another forum that will help.
Re: Project Cafe Rocket 686 begins. Finally!
Posted:
Wed Mar 02, 2016 1:55 pmby dandywarhol
edfmaniac wrote:Found someone on another forum that will help.
Good one
I'm curious to know what part of my reply "Yes" you didn't understand earlier today when you asked for help to get it??
Glad you're sorted out
Alan.
Re: Project Cafe Rocket 686 begins. Finally!
Posted:
Wed Mar 02, 2016 2:08 pmby edfmaniac
dandywarhol wrote:edfmaniac wrote:Found someone on another forum that will help.
Good one
I'm curious to know what part of my reply "Yes" you didn't understand earlier today when you asked for help to get it??
Glad you're sorted out
Alan
I don't know how I missed it. Sorry and thank you for the find. It is very much appreciated.