Page 1 of 1
Enrichment cable removal
Posted:
Fri Jan 17, 2014 3:11 amby Wailpilot
Hi guys
Anyone know how to remove the enrichment cable from the carby?
Wailpilot, Vic Oz
Re: Enrichment cable removal
Posted:
Fri Jan 17, 2014 8:47 amby DAVID THOMPSON
Depends on carb
Most have a fitting thats made of brass that screws in ..
It is more of an enrichment valve than a choke..
Its surface is rubber covered and can cause problems .also the brass valve gets dirty and sticks
When removed from carb it is spring loaded and comes off the cable
Watch how its put together its several small parts
Dave
Re: Enrichment cable removal
Posted:
Fri Jan 17, 2014 12:32 pmby edfmaniac
If memory serves me correctly, there is a rubber boot that slides back to expose a brass hex shaped fitting. Unscrew that fitting and the assembly comes out. I replaced my stock unit with the XT600 plunger style, no cable.
Re: Enrichment cable removal
Posted:
Fri Jan 17, 2014 11:15 pmby Wailpilot
Thanx Guys
Re: Enrichment cable removal
Posted:
Mon Jan 20, 2014 3:07 amby breakwellmz
edfmaniac wrote:If memory serves me correctly, there is a rubber boot that slides back to expose a brass hex shaped fitting. Unscrew that fitting and the assembly comes out. I replaced my stock unit with the XT600 plunger style, no cable.
Hi
I`m very interested in doing the same,can you tell me more please?
Cheers
Re: Enrichment cable removal
Posted:
Mon Jan 20, 2014 8:51 pmby edfmaniac
This part number is the whole assembly. Just pull your old cable and mechanism and screw in this one. 2KF-14371-01-00
Re: Enrichment cable removal
Posted:
Mon Jan 20, 2014 8:52 pmby edfmaniac
Here's another thread on the topic.
viewtopic.php?f=3&t=6201
Re: Enrichment cable removal
Posted:
Tue Jan 21, 2014 4:23 amby breakwellmz
Thanks a lot for that.
Bloody expensive though!
Cheers
Re: Enrichment cable removal
Posted:
Tue Jan 21, 2014 8:55 amby edfmaniac
Look around for a deal. I paid about $45 US for mine.