baghira fairing bar removal.

Black Panther/Street Moto, Baghira, Enduro, Mastiff, Skorpion Traveller and Tour.

Moderators: DAVID THOMPSON, phlat65

baghira fairing bar removal.

Postby eire1400 » Mon Jul 14, 2014 12:13 pm

Hello all. I have seen a few baghira 660's with no 'metal fairing bars' fitted.
How do ye people keep you side panels on? where is the headlight and clocks mounted?
Anyone done this and got some close up pics?
eire1400
 
Posts: 6
Joined: Sat Jun 21, 2014 12:52 am
Location: Cork

Re: baghira fairing bar removal.

Postby rodge70 » Mon Aug 11, 2014 9:14 am

here is my baghira with only the bottom bit of the bars retained to hold the tank panels on,have fitted a couple of bright led's in the ends to tidy them up a bit.
Image
Image
Image

i tapped an m5 thread in top yoke clamp bolts and fixed the indicators there after tightening bolts up and headlight fits with the straps supplied,though i had to split a length of 40mm waste pipe to slip over fork tubes to increase dia to make the headlight a firm fit.trailtech hangs from a bent bit of metal fitted to back of headlight unit.
User avatar
rodge70
 
Posts: 299
Joined: Wed Jan 30, 2008 4:55 pm
Location: bristol

Re: baghira fairing bar removal.

Postby eire1400 » Wed Aug 13, 2014 2:36 am

Nice work, exactly what I was looking for. food for thought thanks
eire1400
 
Posts: 6
Joined: Sat Jun 21, 2014 12:52 am
Location: Cork

Re: baghira fairing bar removal.

Postby Guido » Wed Aug 13, 2014 6:20 am

Hi Rodge
Which bar clamps are you using?
Allan
Guido
 
Posts: 21
Joined: Tue Mar 11, 2014 6:03 am

Re: baghira fairing bar removal.

Postby rodge70 » Sat Aug 16, 2014 10:38 am

hi,got them through work,hi-level catalouge i think,not the dearest around but seem to do the job fine and came with sleeves to fit standard dia bars and a doddle to fit
User avatar
rodge70
 
Posts: 299
Joined: Wed Jan 30, 2008 4:55 pm
Location: bristol


Return to 660 cc

Who is online

Users browsing this forum: No registered users and 24 guests