Page 1 of 1

Baghira Swingarm Chain Glide

PostPosted: Sun Aug 23, 2015 4:43 pm
by jaywillie2912
I need a chain protector for the top of my Baghira swingarm. Need help in locating one. Any help is appreciated.

Thnx

Re: Baghira Swingarm Chain Glide

PostPosted: Sun Aug 23, 2015 8:44 pm
by DAVID THOMPSON
these are not made any longer at least the last time i heard any one ask about them

some glue a used car timing belt the width of the swing arm on it

but i am more in favoe of some thing better than glue
because if that belt comes loose and jams in the rear engine sprocket

things could get real messy

Re: Baghira Swingarm Chain Glide

PostPosted: Mon Aug 24, 2015 7:58 am
by Chuck in Indiana
Charlie shows how to make one in the Skorpion substitute parts thread..

Re: Baghira Swingarm Chain Glide

PostPosted: Mon Aug 24, 2015 9:12 am
by duncmac
Where abouts are you?

Theres ones available on uk ebay froma german seller.

Re: Baghira Swingarm Chain Glide

PostPosted: Mon Aug 24, 2015 9:23 am
by MZCountryRider
My post that Chuck is referring to (about half way down the page): viewtopic.php?f=3&t=6481&start=30
This is the material I used to make the chain guide/glide:
http://www.mcmaster.com/#8702K446