MZ/MuZ Riders

When cranked over far in a corner the bike just about turns off, no throttle response at all until near upright. Do Baggies have inertia switch? A friend recommended hot wiring the kick stand safety switch as that could be the issue. My wife surprised me with a track day tomorrow and this needs to be fixed. New tires being mounted now so bike is not operational til early tonight to test stand safety.. Thanks in advance,
Chris G

Never heard of an inertia switch in reference to motorcycles. Side stand switch would kill the ignition completely.

Track day? Like on a race track? Most places have very strict safety rules. You can't just show up with a street bike and get out there with people who have spent 50hrs going through their bikes to make sure everything is working properly and is safe. That includes lock wiring most of the nuts and bolts on the bike. Call before you haul to make sure your bike will pass safety inspection.

Ya me too but mechanic through it out there as possibility..

and Thanks but I am all good with track day rules. I am a former racer and that is when you need to safety wire bolts that hold liquids. Wire tie kick stand, no antifreeze, remove mirrors and tape over any glass and good to go.

extreme lean angles make float bowls do funny things