OTR Vergaserkitt MZ660

Black Panther/Street Moto, Baghira, Enduro, Mastiff, Skorpion Traveller and Tour.

Moderators: DAVID THOMPSON, phlat65

OTR Vergaserkitt MZ660

Postby mike Redhead » Wed May 18, 2016 11:15 am

Good Evening,

OTR Vergaserkitt MZ660 Has anybody fitted one of these kits to a Baggy, I have a "google" translation of the original OTR German instructions but I am struggling with the orientation of the stumbling pipe as the translation is not very clear, any help would be greatly appreciated.

regards,

Mike
mike Redhead
 
Posts: 2
Joined: Mon May 09, 2016 4:19 pm

Re: OTR Vergaserkitt MZ660

Postby dandywarhol » Wed May 18, 2016 12:20 pm

This should help you Mike
viewtopic.php?f=3&t=8159
Whale oil beef hooked
dandywarhol
 
Posts: 113
Joined: Tue Aug 25, 2015 8:35 am
Location: Edinburgh, Scotland

Re: OTR Vergaserkitt MZ660

Postby mike Redhead » Thu May 19, 2016 1:51 am

Excellent, thank you Dandywarhol, for pointing me in the right direction

Regards,

Mike
mike Redhead
 
Posts: 2
Joined: Mon May 09, 2016 4:19 pm

Re: OTR Vergaserkitt MZ660

Postby edfmaniac » Thu May 19, 2016 7:20 am

Don't use the bits they provide to drill out your stock jets. They are WAY TOO BIG!!! Even the stock jets are too big.
01 Skorpion Traveler 660
edfmaniac
 
Posts: 768
Joined: Tue Jun 21, 2011 10:56 pm
Location: Austin, TX

Re: OTR Vergaserkitt MZ660

Postby dandywarhol » Fri May 20, 2016 5:55 am

With ed on this one - especially with a stock airbox.

I'm currently experimenting with Raptor quad carbs coupled to a Micron pipe - going to the dyno shop next week to get the jetting sorted.
Whale oil beef hooked
dandywarhol
 
Posts: 113
Joined: Tue Aug 25, 2015 8:35 am
Location: Edinburgh, Scotland


Return to 660 cc

Who is online

Users browsing this forum: No registered users and 43 guests