Page 1 of 1

Skorpion Sport Handle Bars

PostPosted: Wed Jul 13, 2016 2:07 pm
by manxie
Hello. Is there a conversion to lift / change the bars on my Skorpion Sport, maybe fit a set of Renthal`s or similar, which will not foul the fairing brackets?

Thanks. :smt023

Re: Skorpion Sport Handle Bars

PostPosted: Thu Jul 14, 2016 10:20 am
by lavrentyuk
Just been through it.

I believe that K1300 helibars fit but are few and far between.

In the end I just reversed them and carefully drilled them for the switchgear fitting which raised them just enough for me.

Richard

Re: Skorpion Sport Handle Bars

PostPosted: Fri Jul 15, 2016 11:12 am
by manxie
Hi Richard,
not thought of that, sounds like a good solution? Did it clear the fairing brackets OK? .... I suppose it must have?
Thanks,
Steve.

Re: Skorpion Sport Handle Bars

PostPosted: Fri Jul 15, 2016 5:41 pm
by lavrentyuk
They do.

Just figure out where the new small holes must go very carefully, the switchgear is not symmetrical and you must swap the bars left-right and upside down.

It has transformed the riding position.

Re: Skorpion Sport Handle Bars

PostPosted: Sat Jul 16, 2016 12:33 am
by manxie
Great tip, thanks for your time :smt023

Re: Skorpion Sport Handle Bars

PostPosted: Sun Jul 17, 2016 7:13 am
by starfield181
At Woodbridge camp yesterday i saw a Skorpion Sport with a pair of modified clamps for the top of the stanchions which raised the bars about 2-3". You fit your own bars to the clamps but they have to be sawn in two and pushed in from either end. Makes for a very flexible arrangement. Wish now I had taken a picture. Bike belonged to lady called Terry who comes from London area - she got them from eBay as a stock item. She is an MZRC member so I may be able to contact her if anyone wants more info.

Re: Skorpion Sport Handle Bars

PostPosted: Sun Jul 17, 2016 8:58 am
by manxie
Hi.
I`d be interested in more info if poss please?
Thanks.

Re: Skorpion Sport Handle Bars

PostPosted: Sun Jul 17, 2016 10:52 am
by DAVID THOMPSON
mine are a set from a saxon95 tour rotax power cut in to
piece of black iron gas pipes to make it stiff
dave

Re: Skorpion Sport Handle Bars

PostPosted: Sun Jul 17, 2016 1:47 pm
by starfield181
manxie wrote:Hi.
I`d be interested in more info if poss please?
Thanks.

Will see what I can do - may take a few days as I will have to get the ladies full name from Eric Hagon.

Re: Skorpion Sport Handle Bars

PostPosted: Sun Jul 17, 2016 2:15 pm
by manxie
Appreciated, thanks for your time. I`ve also posted the "handlebar" question on another forum I use and if I find any solutions I`ll post here.

Thank you. :wink:

Re: Skorpion Sport Handle Bars

PostPosted: Wed Jul 20, 2016 2:10 am
by starfield181
Contacted Eric but he only knows the lady as Terry as well. I cannot trace her from that name alone in the club records, though she is pictured on the front cover of issue 212 of MZ Rider. How sad is that. I'll keep looking as these clamps might make a skorpion and option for me as well.

Re: Skorpion Sport Handle Bars

PostPosted: Wed Jul 20, 2016 5:41 am
by starfield181
Small world, look on the MZ Riders Club Group on facebook and you will find details of Terri Forward and pictures of her Skorpion posted this morning.

Re: Skorpion Sport Handle Bars

PostPosted: Wed Jul 20, 2016 2:43 pm
by manxie
Great find, sadly I don`t do facebook, I tried searching for it but no joy :(