Brake Fluid

SM, SX, RT, FunX, and models re-branded as ATK in U.S.

Moderators: DAVID THOMPSON, phlat65

Brake Fluid

Postby biolator » Thu Mar 24, 2005 5:40 am

For fuild, it is ok i use any type of dot 4 fluid for disc brake?
-zaki-
biolator
 
Posts: 48
Joined: Thu Feb 17, 2005 5:20 am
Location: Kuala Lumpur, Pandan Indah

dot 4 fluid

Postby DAVID THOMPSON » Thu Mar 24, 2005 11:47 am

the shop manual i have say's dot 4 fluid on page 73
it also says dot 4 fluid on the top cover
of the front brake master cylinder

do not get the fluid on plastic and cover up your
speedometer face with some thing when working on the front brakes..
as in the past the fumes from it could fog the speedometer lens..
new type plastic may not do this but don't take a chance
Dave 2002 MZ RT125+1995 Saxon Tour(500cc)
1997 MZ 660 Traveller+6/13/09 WV USA
"IN the end times the IDIOTS will be in charge
of everything"
"I like the road less traveled if it's PAVED!"
wd8cyv at yahoo dot com
User avatar
DAVID THOMPSON
Moderator
 
Posts: 5161
Joined: Sun Nov 23, 2003 11:01 am
Location: Parkersburg, West Virginia USA .questions answered MZ 95 up, BMW 1953 to 1979 and ham radio WD8CYV

Postby phlat65 » Fri Mar 25, 2005 12:05 am

yes, any dot 4 fluid is ok. it relates to the minium boiling point of the fluid, some are rated higher than others. the Motul 600 is the best, I use it in the off road bikes, and in my baggy.
just never use dot 5!!
2001 MZ Black Panther
2001 Suzuki RM125 (full Enduro)
Old Hondas- TT500 Ascott, 305 Dream Touring
User avatar
phlat65
Moderator
 
Posts: 735
Joined: Thu Nov 13, 2003 1:05 am
Location: Seattle

Postby jbthumper » Sat Mar 26, 2005 2:36 pm

is there something wrong with DOT5 being used on an MZ??what about DOT5.1??

all i know is that DOT5 and above is that it won't spoil your paint job if u spill on them...
User avatar
jbthumper
 
Posts: 319
Joined: Tue Mar 23, 2004 3:59 am
Location: Malaysia

Postby phlat65 » Sat Mar 26, 2005 3:37 pm

dot 5 fluid is silicone based, NOT compatible with our rubber components. it will cause a brake system failure.
stick with a quality dot 4 like the Motul 600. only in a racing situation can you boil that fluid. :-D
2001 MZ Black Panther
2001 Suzuki RM125 (full Enduro)
Old Hondas- TT500 Ascott, 305 Dream Touring
User avatar
phlat65
Moderator
 
Posts: 735
Joined: Thu Nov 13, 2003 1:05 am
Location: Seattle

Postby biolator » Sun Mar 27, 2005 3:59 am

phlat65 wrote:dot 5 fluid is silicone based, NOT compatible with our rubber components. it will cause a brake system failure.
stick with a quality dot 4 like the Motul 600. only in a racing situation can you boil that fluid. :-D


i just buy a dot 4 brake fluid, when i want fill into the rear brake system, i just find out, the current fuel is total different form the new one i buyed. The new one, is more light. Is there any different fluid for the front brake and rear brake system? please advice..
-zaki-
biolator
 
Posts: 48
Joined: Thu Feb 17, 2005 5:20 am
Location: Kuala Lumpur, Pandan Indah

Postby jbthumper » Sun Mar 27, 2005 4:13 am

did u check your brake pads first??because u shouldn't top up if your brake pads are worn...replace then...then u can see that the fluid level will go up...
but if your pads are ok...then u may top up...OR flush the old fluid and pour a
new. This would help keep your braking system in good form.

p/s:i'm loosing my front brakes firm grip because of improper maintainance...maybe the rubber mechanism in master pump is worn out...(sigh)
i miss my stoppies :cry:
User avatar
jbthumper
 
Posts: 319
Joined: Tue Mar 23, 2004 3:59 am
Location: Malaysia


Return to 125 cc

Who is online

Users browsing this forum: No registered users and 3 guests