Clamps and plastic are from cycra, probend.
Bent some Wickes 14mmx5mmx1m flat bar into a nice curve using an old fork stantion.
MZ/MuZ Riders
A community for owners and riders or MZ Motorcycles, Scooters, and ATVs.
Home made Handguards MZ Saxon Tour
Moderators: DAVID THOMPSON, phlat65
3 posts
• Page 1 of 1
Home made Handguards MZ Saxon Tour
by paulatradese-6 » Sun Sep 14, 2014 8:14 am
Got fed up with cold hands and no handguards would fit. So Made my own.
Clamps and plastic are from cycra, probend.
Bent some Wickes 14mmx5mmx1m flat bar into a nice curve using an old fork stantion.
Clamps and plastic are from cycra, probend.
Bent some Wickes 14mmx5mmx1m flat bar into a nice curve using an old fork stantion.
- paulatradese-6
- Posts: 11
- Joined: Sun Aug 03, 2014 8:42 am
- Location: Sheffield
Re: Home made Handguards MZ Saxon Tour
by DAVID THOMPSON » Sun Sep 14, 2014 10:35 am
the real advantage to these is every time mine falls over it breaks a lever
no other motorcycle brand in the usa uses this lever
and postage for a couple levers is almost as much as the levers
no other motorcycle brand in the usa uses this lever
and postage for a couple levers is almost as much as the levers
Dave 2002 MZ RT125+1995 Saxon Tour(500cc)
1997 MZ 660 Traveller+6/13/09 WV USA
"IN the end times the IDIOTS will be in charge
of everything"
"I like the road less traveled if it's PAVED!"
wd8cyv at yahoo dot com
1997 MZ 660 Traveller+6/13/09 WV USA
"IN the end times the IDIOTS will be in charge
of everything"
"I like the road less traveled if it's PAVED!"
wd8cyv at yahoo dot com
-
DAVID THOMPSON - Moderator
- Posts: 5153
- Joined: Sun Nov 23, 2003 11:01 am
- Location: Parkersburg, West Virginia USA .questions answered MZ 95 up, BMW 1953 to 1979 and ham radio WD8CYV
Re: Home made Handguards MZ Saxon Tour
by MZCountryRider » Mon Sep 15, 2014 8:56 am
DAVID THOMPSON wrote:the real advantage to these is every time mine falls over it breaks a lever
no other motorcycle brand in the usa uses this lever
Are you sure? The clutch lever appears to be the same as some Moto Guzzis. Perch and lever on both (Rotax) MZ and later Guzzis are made by Domino.
Good job on the handguards! I managed to fit a pair of Acerbis Rally to my Saxon County back when, but it was really tight.
Charlie
'69 Guzzi Ambassador
'71 Guzzi Ambassador
'72 Benelli 175 Enduro
'73 Guzzi Eldorado
'76 Guzzi I-Convert
'77 Morini 3 1/2 Strada
'81 Ducati 500SL Pantah
'82 Moto Guzzi V50 III
'97 MuZ Skorpion Tour
http://www.AntietamClassicCycle.com/
'69 Guzzi Ambassador
'71 Guzzi Ambassador
'72 Benelli 175 Enduro
'73 Guzzi Eldorado
'76 Guzzi I-Convert
'77 Morini 3 1/2 Strada
'81 Ducati 500SL Pantah
'82 Moto Guzzi V50 III
'97 MuZ Skorpion Tour
http://www.AntietamClassicCycle.com/
- MZCountryRider
- Posts: 120
- Joined: Tue Jul 22, 2008 9:16 am
- Location: western Maryland, USA
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 116 guests