Baghira rear suspension bearing

[Uncle Nick]

Hi all, would anyone know the bearing number for MZ part number 901313100?
The spherical impact bearing 12mm x 26mm x 13/16mm, number 8 on the diagram.
I’ll try Grahams on Monday but suspect a bearing supplier will be cheaper.
Thanks

[netguz]

Hi all, would anyone know the bearing number for MZ part number 901313100?

Hi Uncle Nick.

Warning; Please double check all I say because I'm working from memory.

MZ part number 901313100 also fits the Skorpion and when mine failed I was incensed that, c2010, it would cost £58.

Bearing suppliers were almost as annoyed as I was but for a different reason. It was the 13mm measurement that made it a 'bastard' size which are frequently used in the motor industry and don't have a standard i.d. number.

Somehow or another I found out that a Yamaha Raptor used the same bearing and AllBalls made a kit that was something like £20 for two bearings and seals. I pounced.

The problem is that I can't remember which Raptor it was - sorry.

I've no experience with this firm https://www.dirtbikexpress.co.uk/products/all-balls-yamaha-rear-shock-bearing-kit-upper?variation=419730&gQT=2 but they have the AllBalls kit for the Raptors - 'praps they can advise.

Similarish https://www.teknikmotorsport.com/rear-shock-bearing-kit-soqi-26od-12id-13-15-wide but 15mm instead of 16.

Maybe https://quadbikeswales.co.uk/yamaha-yfm350-warrior-banshee-raptor-upper-rear-shock-bearing-bushing-kit.html can help.

Good luck.